How to Install 9 inch Dashboard Panel on Model 3 Highland

In this page , we will introduce how to install the 9-Inch Dashboard Panel on Your Model 3 Highland. Step-by-Step Guide

You could save the page , we maybe load new software, etc. Are you looking to upgrade the interior of your Tesla Model 3 Highland with a sleek new 9-inch dashboard panel? This upgrade can enhance your driving experience and give your vehicle a fresh, modern look. Follow this step-by-step guide to ensure a smooth and successful installation.

Tools and Materials You’ll Need:

9-inch dashboard panel kit (compatible with Model 3 Highland)
Screwdrivers (Phillips and flathead)
Trim removal tools
Adhesive or double-sided tape (if not included in the kit)
Clean cloth

Step 1: Preparation

Park Safely: Ensure your Model 3 is parked on a flat surface with the ignition off. Disconnect the car battery if you're concerned about electrical components.
Clean the Area: Use a clean cloth to wipe down the existing dashboard to remove any dust or debris. This will ensure a smooth surface for the new panel.

Step 2: Remove the Existing Dashboard Panel

Use Trim Removal Tools: Carefully insert the trim removal tools around the edges of the existing dashboard panel. Gently pry the panel away from the dashboard, being cautious not to damage any clips or connectors.
Detach Connectors: If there are any electrical connectors attached to the panel, carefully disconnect them by pressing the release tabs or using a small tool to help with the disconnection.

Step 3: Prepare the New 9-Inch Dashboard Panel

Inspect the New Panel: Before installation, check the new 9-inch panel for any defects and ensure all mounting clips or adhesive strips are intact.
Attach Any Necessary Components: If the new panel requires any additional components or connectors, follow the manufacturer’s instructions to attach them.

Step 4: Install the New Dashboard Panel

Position the New Panel: Align the new 9-inch dashboard panel with the mounting clips or adhesive strips on the dashboard. Ensure that it fits snugly into place.
Secure the Panel: If the panel uses adhesive, press it firmly into place, ensuring that it adheres well to the dashboard. If it uses clips, press the panel gently until you hear the clips snap into place.
Reconnect Electrical Components: If the panel has electrical connectors, reconnect them carefully. Ensure each connector is securely attached.

Step 5: Final Adjustments

Check Alignment: Verify that the new dashboard panel is properly aligned and securely attached. Make any necessary adjustments to ensure a perfect fit.
Test Functions: If the new panel includes functional components (like touch controls or displays), test them to ensure they are working correctly.

Step 6: Clean Up

Reinstall Any Removed Components: If you had to remove any components to facilitate the installation, reinstall them now.
Clean the Dashboard: Give the new panel and surrounding area a final wipe down with a clean cloth to remove any fingerprints or smudges.